How to clean up the waste of the most popular flat

2022-07-31
  • Detail

How to clear the waste of flat pressing and die-cutting machine on weekdays

most automatic flat pressing and die-cutting machines are equipped with waste clearing devices. And most of them are finished by waste cleaning needle, and some are finished by wooden waste cleaning plate. The wooden waste cleaning plate is easy to use, and the waste cleaning effect is better than the waste cleaning needle, which is very helpful to improve the machine speed

pay attention to the following points during waste removal: ① try not to open the connection point on the waste to be removed. ② Ensure that the size of the waste cleaning hole is appropriate. If the waste cleaning hole is too large, the whole die-cut product will be scattered during waste cleaning: if the waste cleaning hole is too small, it will not be removed. Generally speaking, it is appropriate that the waste hole is 1.5 ~ 2.0mm larger than the waste. ③ You can also add some loose sponges on the waste cleaning plate to press the paper during waste cleaning to prevent the paper from spreading after die cutting. Generally, there are few problems in the paper receiving part of the die-cutting machine with a waste cleaning device. The paper receiving part of the die-cutting machine without a waste cleaning device is prone to uneven paper receiving, scattered paper and other bad cleaning phenomena, which can be solved by reducing the machine speed, but will affect the die-cutting efficiency

maintenance of flat pressing die-cutting machine

equipment maintenance is very important for any packaging and printing factory. The maintenance of die-cutting machine has played a positive role in ensuring die-cutting accuracy and prolonging the service life of the equipment, which has attracted extensive attention

the specific experience is introduced as follows: in combination with the machine maintenance manual, list detailed items for each maintenance item and post them next to the equipment. You can add oil to the equipment according to the oil level chart that the equipment needs to add oil: pay attention to the cleaning of the air pump and suction nozzle to ensure smooth paper feeding; regularly clean and oil the pull gauge, main chain bar and tooth row, and check whether the tooth piece is damaged; Check the tightness of the main chain to ensure the accuracy of the equipment; When die cutting small format products, pay attention to adding a balance knife. If the balance knife is not added for long-term die cutting, the pressure in front of and behind the equipment will be different: the machine maintenance and patrol inspectors will check and implement the regular maintenance contents of the operators

in terms of the increasingly strict maintenance and service of die-cutting plates due to domestic environmental protection work, each packaging and printing factory has set up a special die-cutting plate administrator. According to different customers, the manufacturing of these prototypes is completed in cooperation with an experienced third party. The aviation industry continues to use a greater proportion of advanced composite materials in each new generation aircraft, store them in different areas, and record the daily receipt and use of die-cutting plates, Check, repair or replace the die-cutting knife and indentation steel wire when the die-cutting plate is on the machine

the flat pressing and die cutting process will move towards high speed. With the development of high precision, high reliability and humanized machine operation, the operators of the packaging and printing factory need to keep up with the development trend, master the relevant technologies, and continuously accumulate in production, so as to ensure the perfect die-cutting quality and improve the product grade

this article is from the network. The copyright belongs to the original author. It is only for everyone to share and learn. If the author thinks it involves infringement, please contact us. We will delete it immediately after verifying the alloy high carbon steel (or low carbon alloy steel), cold work die steel, etc

Copyright © 2011 JIN SHI